Suggested Application of Pyroblanket Firewall Thermal Barrier and Manifold Boot
It is suggested that P.F.T.B be applied to the engine compartment side of the firewall. Panels should be covered individually, and P.F.T.B should be held in place by three or four 1/8 x 1″ pieces of flat bar fastened across the width of the panel.
It is also suggested that P.F.T.B be applied to the underside of the floor as well as heat tends to rise, making it hot on the operator’s feet.
For the additional heat displacement from the engine compartment, we suggest the use of the manifold boot. This boot is just slipped on and tied with stainless steel wire to secure it in place.
It is also suggested that P.F.T.B be applied to the underside of the floor as well as heat tends to rise, making it hot on the operator’s feet.
For the additional heat displacement from the engine compartment, we suggest the use of the manifold boot. This boot is just slipped on and tied with stainless steel wire to secure it in place.